Let's test your knowledge of important Cisco certification exam topics such as static default routes, access lists and much more!
CCENT Certification:
What command will create a default static route with a next-hop IP address of 30.1.1.1?
Answer: ip route 0.0.0.0 0.0.0.0 30.1.1.1
It could also apply to the local interface output at the end of the command.
CCNA:
It's an ACL for Cisco, which with the word "replace all"?
A. ToSubnet mask of 255.255.255.255.
B. A subnet mask of 0.0.0.0.
C. A wildcard mask of 255.255.255.255.
D. A wildcard mask of 0.0.0.0.
Answer: C.
CCNP Certification / BSCI Exam:
The summary address command is designed for use, what type of OSPF router (s)?
A. ASBR
B. ABR
C. Backbone routers
Help D. Total Router
E. stub router
Answer: A. The synthesis of control-address "is designed for use only on an ASBR. This command is used toIn the streets of synthesis are distributed in OSPF.
CCNP Certification / BSCI Exam:
A Cisco switchport is configured with Root Guard. A superior BPDU is received on this port. What will happen?
A. Nothing.
B. The port goes into root-inconsistent state.
C. The port goes into err-disabled state.
D. The door is locked in the state.
Answer: B. When a superior BPDU is received on a port is protected with guard root, the port will be placed inroot-inconsistent state. This will prevent a change in this port from the main deck.
CCNP Certification / ISCW exam:
Short answer: What is the number of the IP protocol makes use of ESP?
Answer: ESP uses IP protocol number 50
CCNP Certification / ONT exam:
Which of the following sentences are not applicable, WPA2?
A. dynamically generated keys
B. Encryption
C. Intrusion Detection
D. One way authentication
Answer: D. WPA 2 uses mutualAuthentication, not a way of authentication.
Looking for more free Cisco certification exam training questions on this site!